Cel-Fi GO G41-JE-DL-2SO Stationary Telstra |Optus|Voda 11dBi LPDA7040-11 | Dual DAS 6dBi DAS Omni Ceiling Antenna Bundle

Each Cel-Fi GO - G41 Stationary Telstra | Optus | Vodafone bundle consists of...   

G41-JE-003 Telstra | Optus | Vodafone Cel-Fi GO Stationary Unit. Includes 240VAC Power Pack 

1x LPDA7040-11-0.3NF - 11dBi Log Periodic Antenna GSM 698-4000Mhz.

2x DAS6938-SOC150-N DAS 6dBi LTE Omni Directional Ceiling Antenna 698-3800MHz, N type connector 

1x PSP6927-5102-N Pulse 2-Way Splitter  

1x 9207N-10 Cable SMA-M to N-Male 10M (9006)  

1x 9207D-10 Cable N-Male to N-Male 10M (9006)  

1x 9207D-5 Cable N-Male to N-Male 10M (9006) 

1x 9207N-1 Cable SMA-M to N-Male 10M (9006) 

Features of the latest Smart Signal Repeater from Nextivity...

• Switch between operators via the Wave app
• 5G ready. (G41 has 5G capabilities, but currently not enabled or approved by Networks)
• Supports all frequency bands for Telstra, Optus and Vodafone-TPG with exception of B28u(700MHz) for Vodafone-TPG  
• Up to 3,000 m2 coverage area
• Support for Dynamic Spectrum Sharing (DSS)

Also available with 1x Internal Ceiling Antenna bundle - click here

 

This product can work on any of the Australian networks (Telstra, Optus, Vodafone/TPG) but like all other Cel-Fi products it will only amplify one operator’s service at a time. You have the option to switch it between the operators via the Wave app if you wish to change from one network to the other.

Designed to solve indoor mobile voice and data coverage issues, the Cel-Fi GO G41 is the latest and most powerful Smart Signal Repeater to the Nextivity range. Now approved by Telstra.  

Note: This device is only for fixed installation in a building and is not suitable for vehicle installation/useage.